Walker/Wheelchair Bag Tutorial
Some of you asked for this. This is literally one of the EASIEST, most appreciated projects that I have ever made. I timed myself while I made this one and it was finished in under 1/2 hour and that included refilling bobbins, taking pictures, and searching the button box for two matching buttons. They are even faster if 1.) you don't do all of the above and 2.) you make them on an assembly line. Step 1. Cut a piece of fabric for the straps 4 inches wide by 14 or so inches long. If you have a very lightweight fabric, you can double it or use press on interfacing to back it. Step 2. Cut two coordinating rectangles approximately 12 to 15 inches by 15 to 18 inches. This is very loose, you can use vary the size of them. Pin those together on the bottom and halfway up the sides. Step 3. Press the 4 inch rectangle in half lengthwise with wrong sides together and sew around raw edges, then zig - zag the edge. If the fabric frays really bad, you can go over it again. Step 4...
Comments
You should draw up an advertising contract with Michaels!!!!
Prim Blessings
Robin
Cathy
Courtney